Whitby Aerial Lift Training

Whitby Aerial Lift Training - An aerial work platform is a mechanical access platform. This particular machinery provides access to otherwise inaccessible areas for equipment or people. Also referred to as an elevating work platform or aerial device, the machinery is normally used to be able to access high places. Construction and maintenance staff usually should make use of aerial work platforms on the job. They are utilized by firefighters for emergency access.

Intended for temporary use, aerial work platforms are different from elevators, which provide permanent access to high places. An aerial work platform is intended to be operated by a single person, and is capable of lifting weights of less than one ton. Several types have higher load limits. There are different kinds of aerial work platforms; like for instance, there is a "scissor lift" and a "cherry picker".

Some aerial work platforms come outfitted with compressed air connectors for power tools or electrical outlets. For specialist tasks, such as lifting frames for window glass, an aerial work platform could come together with special tools.

Those who would like to operate an aerial lift machine should go through training. Normally, the members of a Health & Safety Committee and their representatives are responsible for the inspection of each and every machine and work places and are likewise needed to go through training. Trainees will know how to utilize an aerial lift machinery. They will also know the regulations which apply to the safe operation of these devices. Regulations vary in various provinces, and within worksites that are federally regulated.

Any worker who is needed to be lifted by or work near an aerial lifting device should be informed concerning potential hazards. In a general safety session, an Aerial Lift Training Video can be shown to educate all of the staff who work near them or are lifted by them.

Most Aerial Lift Training Program would consist of modules which are focused on the following areas: Aerial Lift Devices and Operating Controls; Hazard Identification; Pre Operational Checks for Aerial Lift Devices; and Platform Positioning & Park Positioning. The particular program is intended to train staff on safely using self-propelled, boom supported elevated work platform and self-propelled, elevated work platform. Employees who complete the program will receive a certificate, signed by a qualified individual to be able to confirm successfully finishing a hands-on practical evaluation.

Click to Download the pdf