Whitby Forklift Training Course

Whitby Forklift Training Course - Federal and industry regulators have established the criteria for forklift safety training based on their current regulations and standards. People wishing to utilize a forklift must complete a forklift training program before making use of one of these equipment. The accredited Forklift Operator Training Program is intended to provide people training with the information and practical skills to become a forklift operator.

There are forklift operation safety regulations which should be followed pertaining to pre-shift checks, and regulations for lifting and loading.

Prior to a shift starting, an inspection checklist has to be carried out and submitted to the Supervisor or Instructor. If any maintenance problem is discovered, the machine should not be utilized until the problem is dealt with. To indicate the equipment is out of order, the keys must be removed from the ignition and a warning tag placed in a spot which is seen.

Safety rules for loading would include checking the load rating capacity on the forklift to determine how much the machinery could handle. When starting the machine, the forks must be in the down position. Remember that there is a loss of around one hundred pounds carrying capacity for every inch further away from the carriage which the load is carried.

Lifting must begin with the driver moving to a stopped position roughly three inches away from the load. The mast should then be leveled until it has reached a right angle with the load. Lift the forks to one inch underneath the slot on the pallet and drive forward. Then lift forks four inches. Tilt back the load to secure it for moving. Drive the lift backwards if the load obscures frontal vision. Check behind and honk to warn other workers. Never allow forks to drag on the ground.

The load must be loaded by the forklift in such a way that ensures the load is secure and would not cause a danger to other objects or people. Restraining loads is needed for materials which could shift during transport and destabilize the forklift.

So as to prevent the shifting of drums, drums could be strapped together to lessen movement. Operators of forklifts must drive slowly when transporting liquids, to lessen instability in the forklift.

Click to Download the pdf