Whitby Forklift Training Schools

Whitby Forklift Training Schools - Forklift Training Schools - For The Wellbeing Of Your Workers

If you are searching for a job as a forklift operator, our regulatory-compliant lift truck training Schools offer excellent instruction in numerous types and styles of forklifts, lessons on pre-shift inspection, fuel types and handling of fuels, and safe utilization of a forklift. Hands-on, practical training helps people participating in obtaining basic operational skills. Program content consists of existing rules governing the operation of forklifts. Our proven forklift Schools are meant to offer training on these kinds of trucks: counterbalanced forklift, powered pallet trucks and narrow isle forklift.

Do not raise or lower the fork while the lift truck is traveling. A load should not extend over the backrest due to the danger of the load sliding back in the direction of the operator. Check for overhead obstacles and ensure there is plenty of clearance prior to raising a load. Stay away from overhead power lines. When the load is raised straight up, tilt it slightly back.

While the load is raised the forklift will be less steady. Make certain that no pedestrians cross below the elevated fork. The operator should not leave the lift truck when the load is raised.

While handling pallets, forks must be level and high enough to go into the pallet and extend all the way under the load. The fork's width must provide equal distribution of weight.

Prior to unloading or loading the truck, set the brakes and chock the wheels. Floors must be strong enough to support the weight of the forklift and the load combined. Fixed jacks can be installed to support a semi-trailer which is not attached to a tractor. The height of the entrance door must clear the height of the forklift by at least 5 cm. Mark edges of ramps, docks or rail cars and avoid them.

Click to Download the pdf