Whitby Forklift Training School

Whitby Forklift Training School - Why Individuals Who Use A Forklift Must Take A Forklift Training School - Industry and federal regulators have established the criteria for forklift safety training based on their current regulations and standards. People wanting to use a forklift must complete a forklift training program prior to working with one of these machines. The accredited Forklift Operator Training Program is designed to offer trainees with the practical skills and knowledge to become a forklift operator.

There are forklift operation safety rules which must be followed pertaining to pre-shift inspections, and rules for loading and lifting.

Prior to a shift starting, an inspection checklist has to be completed and submitted to the Instructor or Supervisor. If whichever maintenance problem is discovered, the machinery must not be used until the problem is dealt with. To be able to indicate the equipment is out of service, the keys should be removed from the ignition and a warning tag placed in a spot that is visible.

Loading safety rules comprise checking the forklift nameplate's rating capacity and determining if the weight of the load falls within capacity. The forklift forks must be in the down position when the forklift is starting up. Bear in mind that there is a loss of approximately one hundred pounds carrying capacity for every one inch further away from the carriage that the load is carried.

To be able to safely lift a palletized load, drive the forklift to the pallet and stop with the fork three inches away from the load. Level the mast until it is at right angles to the load. Raise the forks to an inch beneath the slot on the pallet and drive forward. Next lift forks four inches. Tilt back the load to be able to secure it for moving. Drive the lift in reverse if the load obscures frontal vision. Check behind and honk in order to warn other workers. Never allow forks to drag on the ground.

Click to Download the pdf